Panasonic KX-TA624 Installation Manual page 332

703–705
Door Opener Assignment — Day/Night/Lunch
Description
Selection
Default
Programming
Conditions
Feature References
4-118 System Programming
4.2
These programs assign which extensions can open a door in the
day, night and lunch modes.
• Door opener number: 1 – 4,
• Jack number: 01 – 24,
• Enable / Disable
All door openers – all jacks – Enable
1. Enter a program address (703 for day, 704 for night or
705 for lunch).
Display example: Day Door-Open
2. Press NEXT.
Display: Door NO?
3. Enter a door opener number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:#01:Enable
4. Keep pressing
or enter a jack number after pressing the # key.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack number, press
the desired jack number.
8. Repeat steps 5 through 7.
9. To program another door opener, press NEXT or PREV, or
SELECT and enter the desired door opener number.
10. Repeat steps 4 through 9.
11. Press END.
• To assign all door openers and all jacks to the same selection, press the
key in steps 3 and 4.
In this case, the display will show: DP- :#
• Four door openers can be installed per system.
Section 3, Features
Door Opener
Time (Day/Night/Lunch) Service
System Programming
( = all door openers)
( = all jacks)
until the desired jack number is displayed
:Mixed.
or , or # and