Flash Key Mode - Panasonic KX-TA624 Installation Manual

110
Description
Selection
Default
Programming
Condition
Feature References
4-34 System Programming
4.2

Flash Key Mode

Assigns sending a flash signal when the FLASH button on a
proprietary telephone is pressed.
MODE 1 (A flash signal is sent during the time programmed in
program "[418] Flash Time")
MODE 2 (A flash signal is sent while the FLASH button is
pressed.)
MODE 2
1. Enter 110.
Display: Flash Key
2. Press NEXT.
Display example:MODE 1
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• For MODE 2, a flash signal will be sent for the programmed time in
program [418] if the FLASH button is pressed for less than the
programmed time.
Section 3, Features
External Feature Access
Flash
System Programming