Panasonic KX-TA624 Installation Manual page 27

2.1 Before Installation
2. If cables are run on the floor, use protectors to prevent the wires
from being stepped on. Avoid wiring under carpets.
3. Avoid using the same power supply outlet for computers,
telexes, and other office equipment. Otherwise, the system
operation may be interrupted by the induction noise from such
equipment.
4. Please use one pair telephone wire for extension connection of
(telephone) equipment such as single line telephones, data
terminals, answering machines, computers, voice processing
systems, etc., except Panasonic proprietary telephones (e.g.,
KX-T7030, KX-T7130).
5. Unplug the system during wiring. After all of the wiring is
completed, plug in the system.
6. Mis-wiring may cause the system to operate improperly. Refer
to Section 6.1 "Installation" and Section 6.2 "Connection".
7. If an extension does not operate properly, disconnect the
telephone from the extension line and then connect again, or
turn off the Power Switch of the system and then on again.
8. The system is equipped with a 3-wire grounding type plug. This
is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type plug.
9. Outside (CO) Lines should be installed with lightning
protectors. For details, refer to Section 2.3.3 "Outside (CO)
Line Connection – Installing Lightning Protectors".
E R
P O W
Warning: Static sensitive connectors
Warning:
Static sensitive devices
are used. To protect
printed circuit boards
from static electricity,
do not touch connectors
indicated to the left. To
discharge body static,
Side View
touch ground or wear a
grounding strap.
Installation 2-3