Dtmf Receiver Check - Panasonic KX-TA624 Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature References

DTMF Receiver Check

Enables or disables the DTMF receiver to check whether the DTMF
receivers are activated normally or not.
Six DTMF receivers work with the following cards.
DTMF-R 1 and 2 — basic extension card (jacks 01 – 08)
DTMF-R 3 and 4 — extension expansion card 1
DTMF-R 5 and 6 — extension expansion card 2 (jacks 17 – 24)
• DTMF Receiver number: 1 – 6
• Enable / Disable
All DTMF receivers — Enable
1. Enter 107.
Display: DTMF-R Selection
2. Press NEXT.
Display:DTMF-R NO?
3. Enter the DTMF receiver number.
Pressing NEXT also can enter DTMF receiver number 1.
Display example:DTMF-R1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another DTMF receiver, press NEXT or PREV,
or SELECT and enter the desired DTMF receiver number.
7. Repeat steps 4 through 6.
8. Press END.
None
None
(jacks 09 – 16)
System Programming
107
4-31