Panasonic KX-TA624 Installation Manual page 240

103
DTMF Integration for KX-TVS75/KX-TVS100/KX-TVS110
Description
Selection
Default
Programming
Conditions
Feature Reference
4-26 System Programming
4.2
Enables or disables the system to send codes (DTMF tones) to
indicate the status of a call (busy, answered, ringing, disconnected,
etc.) in addition to the normal call progress tones. These codes
enable the Panasonic Voice Processing System
(KX-TVS75/KX-TVS100/KX-TVS110) to immediately recognize
the current status of the call and speed up the call handling.
Enable / Disable
Disable
1. Enter 103.
Display example: DTMF Integration
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• The table on the next page describes the codes (DTMF tones), call state
and conditions for the DTMF integration operation.
• Extensions which are not assigned as the voice mail ports will not receive
the DTMF tones.
• In order to select "Enable" in this program, programs [130] "Voice Mail 1
APT Port for KX-TVS50/KX-TVS80" and [131] "Voice Mail 2 APT Port
for KX-TVS50/KX-TVS80" should first be set to "Disable".
• This feature improves the performance of the Panasonic KX-TVS75/
KX-TVS100/KX-TVS110 which have been programmed for Inband
Signaling. Please refer to the Voice Processing System manual for details
on programming Inband Signaling.
Section 3, Features
Voice Mail Integration for KX-TVS75/KX-TVS100/KX-TVS110
System Programming