2-3: Prepare Nec Express5800/Ft Series - NEC Express5800/340Hb-R N8800-047F User Manual

4-10 Windows Setup

2-3: Prepare NEC Express5800/ft series

With the power of NEC Express5800/ft series off, follow the steps below:
1. Prepare NEC Express5800/ft series.
When installing OS on the hard disk mounted in the main unit (standard configuration):
•
Mount all PCI modules (for Group1/for Group2), CPU modules (for Group1/for
Group2), and expansion PCI modules (for Group1/for Group2).
•
Remove all LAN cables.
•
Remove all optional PCI boards.
•
Mount a hard disk only in the Slot1 of the PCI module for Group1.
•
Remove optional SCSI devices such as a tape device from the internal SCSI
connector.
When installing OS on the hard disk mounted in the Disk Expansion Unit:
•
Mount all PCI modules (for Group1/for Group2), CPU modules (for Group1/for
Group2), and expansion PCI modules (for Group1/for Group2).
•
Remove all LAN cables.
•
Remove all optional PCI boards except for the PCI boards (SCSI boards) for the
Disk Expansion Unit.
•
Install a hard disk only in Slot1 on the Disk Expansion Unit.
•
Remove optional SCSI devices such as a tape device from the internal SCSI
connector.
IMPORTANT:
the specified slots. If multiple hard disks are inserted, the hard disk to install OS cannot
be determined.
Do not mount any hard disk into any slots of any modules other than