NEC Express5800/340Hb-R N8800-047F User Manual page 90

4-42 Windows Setup
Registering RDR key
When using the RDR function for the first time, follow the steps below
1. Inse rt "RDR Key FD" that came with the server into the floppy disk
2. From [Start], select [All Programs] – [Accessories] – [Windows
Ex plorer, and then double-click "RDRreg.bat" in FD.
3. The message "RDR registration has completed." appears on the c
RDR function becomes available.
4. Pre s any key on the command prompt to close the window. s
Se ttin dual disk configuration g
1 . From [Start], select [All Programs] then [RDR] and click [RDR Utility
2 . From the tree on the left on the "RDR Utility", right-click a disk where the system is installed
(Slot1 of PCI module (Group1)) and click [Add RDR Virtual Disk].
TIPS:
In "RDR Utility", names of PCI modules correspond as below:
PCI module (Group1) - PCI module 1
PCI module (Group2) - PCI module 2
Depending on the disk type, RDR setting may take longer time and the "RDR Utility"
may appear to freeze for several minutes, however it is not an error. Wait until the
process ends.
to register the key:
drive.
Explorer] to start Windows
ommand prompt, and the
] to start "RDR Utility."