NEC Express5800/340Hb-R N8800-047F User Manual page 46

3-8 Installing Server
IMPORTANT:
About the USB floppy disk drive
When mounting the NEC Express5800/ft series, use the rails shipped with it and attach
them to the lower part of the NEC Express5800/ft series.
To connect, remove or exchange a USB floppy disk drive, ask maintenance personnel with
technical expertise to do so.
To a 1000Mbps network
To a 100Mbps network
To a SCSI
backup device
IMPORTANT:
Connection of optional devices
In the case of standard configuration, you need to complete setup of the operating
system before mounting optional PCI cards or hard disks that you purchased
separately.
If N8803-031F is mounted, be sure to connect cables to the FC array unit before going
on to the next step.
Keyboard (via keyboard
hub to mouse)
Display
Reserved for
maintenance
Reserved for
maintenance
USB floppy
disk drive