NEC Express5800/340Hb-R N8800-047F User Manual page 80

4-32 Windows Setup
38. After restarting, the [Welcome to the Windows Setup Wizard] screen will appear.
Click [Next>] and follow the instruction of the wizard. After completing operations in the
wizard, the NEC Express5800/ft series will be restarted automatically.
IMPORTANT:
•
Read [License Agreement] thoroughly.
If you agree, click [I accept this agreement.] and click [Next>].
If you do not agree, click [I don't accept this agreement.] and click [Next>].
If you do not agree, the setup will be terminated and Windows will not be
installed.
•
During the setup, the CPU module's Status LED 1 and the PCI module's Status
LED 1 illuminate red, but that does not indicate a module failure. Once the setup is
complete and each module is successfully duplicated, the CPU module's Status
LED 1 and the PCI module's Status LED 1 turn off and the CPU module's Status
LED 2 and the PCI module's Status LED 2 illuminate green. For details of each
module LED indication, see "LEDs" in the separate volume "User's Guide".
39. After restarting, the following message appears and the NEC Express5800/ft series setup is
continued. Press any key to continue the process.
***********************************************************
NEC Express5800/ft series clear installation processing...
Please follow the instructions which appear on the screen.
***********************************************************
Strike a key when ready . . .
40. The following message will appear. Follow the instruction in the screen and insert the NEC
EXPRESSBUILDER CD-ROM into the drive, and then press any key.
Insert the NEC EXPRESSBUILDER CD-ROM into CD-ROM drive.
Strike a key when ready . . .