Step 1: Things Required For Setup - NEC Express5800/340Hb-R N8800-047F User Manual

4-4 Windows Setup

Step 1: Things Required for Setup

The following explains the setup procedure using the ft series setup program:
IMPORTANT:
judgment. If you desire to apply service packs, contact your sales agent about application
status and apply service packs to NEC Express5800/ft series.
For the latest information on support for Windows Service Pack, contact your
TIPS:
sales agent.
You need the following to install Windows Server 2003:
NEC EXPRESSBUILDER (CD-ROM)
ft Update CD
This CD-ROM is used to update ft control software; it may not be shipped with the
equipment. (Not included if "NEC EXPRESSBUILDER" CD-ROM contains the latest
version of software programs at the time of shipment.)
Microsoft Windows Server 2003 Enterprise Edition (English) CD-ROM
NEC Express5800/ft series supports the following operating system:
Microsoft® Windows® Server 2003 Enterprise Edition (Without SP) (English)
IMPORTANT:
If OS media which service pack is applied is used, applying service pack or Microsoft
update module may fail during installation. Perform installation again using OS media
which service pack is not applied.
RDR Key FD
RDR Key FD is included only for NEC Express5800/ft series with Rapid Disk Resync.
ft control software Ver3.0 Update module No.001 FD
Unnecessary if the NEC Express5800/ft series ft UPDATE CD-ROM is used for setup.
User's Guide (Setup) (this manual)
User's Guide
IMPORTANT:
latest version of its Update CD-ROM, ask your sales agent.
Before starting the setup, decide the size of the partition where the operating system will be
installed.
Do not apply service packs to NEC Express5800/ft series based on your
You cannot use the OS media which service pack is applied.
About the latest release of ft control software and purchase of the