NEC Express5800/340Hb-R N8800-047F User Manual page 141

10. Start Devic e Manager, choose [View] then [Device by connection] and do the following:
a) Del ete the red-circled device entries in the following figure.
IMP ORTANT:
which appears as child entries of "ACPI Multiprocessor ftServer".
Delete the follo
- StratusDual
- StratusDual Initiated Disk Device
- Stratus Fault Tolerant 69000 V
- ! Unknown Device
a-1.
a-2.
11. When the option board is connected, perform the following operations for each option.
Use th e CD-ROM you used in step 6 and perform these operations:
a) When N8804-001P1 (100BASE-TX Adapter) is connected
a-1.
a-2.
a-3.
Do not uninstall entries for "Stratus Fault To
wing device entries:
Initiated Disk Device
Select the device and right-click. Choose [Uninstall].
After the [Confirm Device Removal] dial
name and then click [OK].
Execute [Command Prompt].
Run the following command from Command Prompt and move to CD-ROM
drive.
C:\> CD-ROM drive:
Run the following command from Command Prompt and move to the folder with
the batch file.
CD-ROM drive:\> cd \WINNT\DOTNET\EN
ideo
og box displayed, confirm the device
Troubleshooting 6-17
lerant 69000 Video"