NEC Express5800/340Hb-R N8800-047F User Manual page 83

[Team #1: Adaptive Fault Tolerance Mode] is added to Network Component Tree.
4. Select [Stratus emb-82559 10/100 Enet Adapter] from Network Component Tree. T
pop-up menu appears. Select [Team #1: Adaptive Fault Tolerance Mode] from [Add to
T am], and add the adapters. e
Yo u will see the warning message when you add the team. You can ignore this warnin
message by clicking [OK]. This warning message is to inform you that only one adap
adde d to the team.
5. Select [Stratus emb-82559 10/100 Enet Adapter #2] from Network Component Tree in the
sam e manner as for 4. The pop-up menu appears. Select [Team #1: Adaptive Fault
To lerance Mode] from [Add to Team], and add the adapters.
IMPORTANT:
adapter.
6. Mak e settings of dual configuration for "Stratus emb-82544GC Copper Gigabit Adapter"
(1000Base) as well.
Perform 3 to 5 in the same manner, replacing [Stratus emb-82559 10/100 Enet Adapter]
with [Stratus emb-82544GC Copper Gigabit Adapter].
In 3, you can also s
Balancing Mode] will be added.
Do not set [Preferred Primary] or [Preferred Secondary] to each
elect [Load Balancing]. In this case, [Team #X: Adaptive Load
Windows Setup 4-35
he
ter is
g