Setup Flow - NEC Express5800/340Hb-R N8800-047F User Manual

Setup Flow

The following flow-chart illustrates
the flow of the setup procedures for
the NEC Express5800/340Hb-R
server.
Corresponding page numbers are
shown in parentheses.
Entered or selected by the
:
user
: Proceeds automatically
Step 1: Things Required for Setup
Step 2: Prepare for ft series Setup
Step 3: Disable Boot Monitoring Function
Step 4: Start the ft series Setup
Run [Setup] from NEC EXPRESSBUILDER top menu
Prepare for Windows Server2003 Enterprise Edition installation
and ft control software installation
Insert Windows Server 2003 Enterprise Edition CD-ROM in the
CD-ROM drive
Enter the product ID of Windows Server 2003
(Unnecessary when OS's Backup CD-ROM is used)
Specify the size of the partition for OS installation
Copy OS module to hard disk
Select language for HotFix
Automatic installation starts:
Windows Server 2003 Enterprise Edition
ft control software
NEC ESMPRO Agent
Windows Setup Wizard starts
Agree to the terms of software license
Enter user name and company name
Insert NEC EXPRESSBUILDER CD-ROM
into the CD-ROM drive
Step 5: Set Dual LAN Configuration
Step 6: Set Dual Disk Configuration
Step 7: Update Software
Step 8: Connect and Configure Options
Step 9: Create Volume
Step 10: Set Network for NEC ESMPRO Agent
Step 11: Enable Boot Monitoring Function
Step 12: Set up Failure Management
- Set memory dump (debug information)
- Set Dr. Watson
- Install a network monitor
- Set MTBF type
Setup completed
Windows Setup 4-3
(P.4-4)
(P.4-6)
(P.4-14)
(P.4-19)
(P.4-34)
(P.4-37)
(P.4-46)
(P.4-46)
(P.4-47)
(P.4-48)
(P.4-50)
(P.4-51)