4-38 Windows Setup
4.
Confirm that the hard disk to be converted is the ha
and click [Convert].
If the selected hard disk contains a system partition, you will have to restart the co
to complete the upgrade of the hard disk. The message also states that file systems on
of the hard disks to
systems are in use at the time of upgrade, they will be dismounted
continue.
5.
After the system has rest
for creating mirror volume.
IMPORTANT:
When the hard disk status is "Not Initialized", right-click that hard disk and initialize
If "Foreign" is displayed, perform "C
to Dynamic Disk...".
Hard di
sks to be mirrored must be inserted to the corresponding slots. For details, see
the diagram below:
Group1
Group2
be upgraded will be forcedly dismounted. This means if any file
arted, display [Disk Management] again and set the hard disks
onvert to Basic Disk" and then perform "Convert
Slot1
Corresponding slots for mirroring process
rd disk where the system is installed
, so that the upgrade can
Slot2
mputer
any
it.
Slo
t3