NEC Express5800/340Hb-R N8800-047F User Manual page 70

4-22 Windows Setup
8. A message for reconfirming usage of the "NEC Express5800/ft series ft Update CD" will
appear. Enter "Y" if the selection is correct. Enter "N" if it is wrong.
The additional ft Update CD will be used. Are you sure [Y,N]?
Or
The additional ft Update CD will not be used. Are you sure [Y,N]?
9. <Only when the usage of the "NEC Express5800/ft series ft Update CD" is selected>
The message below will appear. Insert ft Update CD into CD-ROM drive and press Enter
key.
If you have an additional ft Update CD and wish to use it,
insert the CD-ROM into the CD-ROM drive.
Use an additional ft Update CD [Y,N]?Y
The additional ft Update CD will be used. Are you sure [Y,N]?Y
Insert the ft Update CD into the CD-ROM drive and press ENTER.
IMPORTANT:
not selected, the above message will not appear. Go on to 10.
10. "Important 1" message will appear.
Read the message and follow the instructions.
To install the OS on the Disk Expansion Unit, you need to have PCI boards
TIPS:
(SCSI controllers) for Disk Expansion Unit mounted.
*** Important 1
- Confirm that there are no optional boards installed into the
PCI module.
If there are optional boards installed into the PCI module,
terminate the installation process and remove the boards,
and then restart the installation process.
Caution: When optional boards are installed into the PCI module,
the installation process will not complete properly.
Terminate installation [Y,N]?
When the usage of the "NEC Express5800/ft series ft Update CD" is