NEC Express5800/340Hb-R N8800-047F User Manual page 132

6-8 Troubleshooting
5. When you start up Recovery Console from Windows Server 2003 CD-ROM, the following
message appears. Press the R key to boot Recovery Console.
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) to run on your computer.
- To set up Windows now, press ENTER.
- To repair a Windows installation using
Recovery Console, press R.
- To quit Setup without installing Windows, press F3.
IMPORTANT:
started up the Recovery Console installed on the system.
6. Follow the messages on the screen to start up the Recovery Console.
IMPORTANT:
When you restored a damaged file using the Recovery Console, update the
system described in the next section.
If you run the system without restoring files, enable the configuration for boot
monitoring function. Select [Stratus] - [Monitoring Configuration] - [Boot
Monitoring] and choose "Enabled". See "Step 11: Enable Boot Monitoring
Function" (4-47) for details.
The message shown above does not appear when you have