Preparations For Setup; Prepare Nec Express5800/Ft Series - NEC Express 5800 Series Installation Manual

Chapter 1 Installing OS
1.2

Preparations for Setup

Before SETUP, be sure to do the following.
IF YOU DO NOT PREPARE, SETUP CANNOT BE PERFORMED PROPERLY.

1.2.1 Prepare NEC Express5800/ft series

The components shown below are required for setup.
DISK ACCESS LED
To install ESXi on internal disk,
only one hard disk drive should
be installed in this slot.
FRONT
PRIMARY LED
Module POWER LED
REAR
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
CPU/IO module 0
System POWER LED
POWER switch
CPU/IO module 1
DUMP (NMI)
switch
AC inlet
connector A
AC inlet
connector B
1. Setup Procedure
15