NEC Express5800/340Hb-R N8800-047F User Manual page 150

6-26 Troubleshooting
PROSet II does not start after the system is up
Did you reboot the system after brea
II?
→ PROSet II does not start if the system
breaking dual LAN configuration
may become unstable.
In such case, install PROSet II again by following the steps below:
1) Start a command prompt.
2) Run c:\pnpdrvrs\procomp /proset/ s from the command prompt.
3) Reboot the system.
4) Set dual LAN configuration.
dated.
king dual LAN configuration and uninstalling PROSet
's update was performed without rebooting after
and uninstalling PROSet II. Also, system performance