NEC Express5800/340Hb-R N8800-047F User Manual page 72

4-24 Windows Setup
14. "Important 5" message will appear.
Read the message and follow the instructions.
*** Important 5
- Confirm that no LAN cables are connected to the server at this
time.
If there are LAN cables connected to the server, remove them,
and press any key to continue the installation process.
Strike a key when ready . . .
15. <Only when the usage of the "NEC Express5800/ft series ft Update CD" is selected>
The message below will appear. Wait about 3 minutes until copying is completed.
Copying necessary NEC Express5800/ft series system software to the
system drive... Approximately 3 minutes.
Necessary NEC Express5800/ft series software has been copied.
IMPORTANT:
not selected, the above message will not appear. Go on to 16.
16. When message requesting for Windows Server 2003 CD-ROM appears, follow the
instruction on the screen and insert the Windows Server 2003 Enterprise Edition CD-ROM
into the CD-ROM drive.
Insert the Windows Server 2003 CD-ROM
Strike a key when ready . . .
17. When message for inputting Windows Server 2003 product ID appears, enter the product ID.
Input the WindowsServer2003 ProductID.
Note: Hyphens must be inserted.
Input example: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
ProductID?
IMPORTANT:
used.
When the usage of the "NEC Express5800/ft series ft Update CD" is
This message will not appear when the OS's Backup CD-ROM is