Trunk Programming Error Codes - Toshiba Strata CIX Programming Manual

Trunk Programming Error Codes

Program Code
33
33
33
33
49
49
49
49
300
49
49
49
54
80
80
80
96
96
33
301
80
Strata CIX/CTX Telephone Button Programming 11/04
Occurred Sub-
FB parameter
FB01
The equipment number entered is out of the range.
FB02
The ILG entered is out of the range.
FB03
The OLG entered is out of the range.
FB12
The hunting order entered is out of the range.
When modifying previously assigned equipment:
•
FB01
•
The ISDN ILG number is designated for analog trunks or the
FB02
entered ILG number does not exist in the system.
FB02
ì0î was entered in ILG when OLG was not registered.
FB02
The OLG entered is not registered in the system.
The ISDN OLG number is designated for analog trunks or the
FB03
entered OLG number does not exist in the system.
FB03
ì0î was entered in OLG when ILG was not registered.
FB02
A conflict exists between the ILG number and the OLG
FB03
number trunk type.
The quantity of lines, ISDN channels and PDNs entered
FB00
exceeds the number of ports licensed with this processor.
A trunk number that does not exist in the system has been
FB00
selected.
FB02
The entered ILG number does not exist in the system.
FB03
The entered OLG number does not exist in the system.
FB00
Allowable number of trunks has been exceeded.
FB00
The line number entered exceeds the system's capacity.
FB01
The trunk number entered is out of the range.
A trunk number that does not exist in the system has been
selected.
Error Descriptions
The designated PCB Type does not allow CO trunk
assignments.
The designated circuit does not allow CO trunk
assignments.
System Error Codes
Trunk Programming Error Codes
2-13