Toshiba Strata CIX Programming Manual page 134

System Error Codes
Trunk Programming Error Codes
Program Code
318
319
320
321
322
2-18
Occurred Sub-
FB parameter
FB15
33
FB05 ~
48
FB10
FB03
49
FB04
49
FB03
80
FB00
82
FB01
82
FB03
96
FB04
FB01~FB03
33
FB01~FB03
48
FB00
33
FB01~FB03
54
FB00
80
FB00
33
FB00
80
-
33
FB00
80
FB01
80
FB02
FB01
80
FB02
FB01
80
FB02
FB00
82
FB03
96
Error Descriptions
The pause assignment is wrong.
No incoming destination number is assigned for the required
parameter.
The selected GCO conflicts with an existing ILG number.
The selected Pool Line Group conflicts with an existing ILG
number.
The entered GCO key group does not exist in the system.
The selected ILG number does not exist in the system.
The selected ILG number does not exist in the system. The
number of ILGs exceed the system capacity.
The number of allowable GCO or POOL key group
assignments has been exceeded.
The destination number entered is wrong.
The destination number is not assigned.
The entered equipment value is invalid.
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
The circuit for the designated PCB must be an assigned ISDN
primary trunk.
The OLG entered is out of the range.
The entered OLG number does not exist in the system.
The Group CO or Pool Line Group Destination is out of range
(1~128).
The entered OLG number does not exist in the system.
The designated extension number does not exist in the
system.
The entered GCO value does not exist in the system.
The entered POOL value does not exist in the system.
The OLG entered is out of the range.
The allowable system DID assignments has been exceeded.
Strata CIX/CTX Telephone Button Programming 11/04