Toshiba Strata CIX Programming Manual page 34

Telephone Button Programming
200 Series Programs
Table 1-14 Programs 200~202 (continued)
Button Sequence
200-23 Travelling COS
Change
FB23 Hold
, n,
200-24 TGAC Override
FB24 Hold
, n,
200-25 Service Tones
FB25 Hold
, n,
200-26 Call Waiting and ROB
Tone
FB26 Hold
, n,
200-27 Name Display
FB27 Hold
, n,
200-28 Door Ovr DND
FB28 Hold
, n,
200-29 Emergency Ringdown
FB29 Hold
, n,
200-30 Change System
Speed Dial
FB30 Hold
, n,
200-31 Network COS
FB31 Hold
, n,
200-32 Auto OCA
FB32 Hold
, n,
200-33 Originate OCA
FB33 Hold
, n,
200-34 RSTU Supervision
FB34 Hold
, n,
200-35 Station Speed Dial
Bins
FB35 Hold
, n,
200-39 CO Park & Hold
FB39 Hold
, n,
200-40 Stutter Dial Tone
FB40 Hold
, n,
1-30
Value(s)
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Override
2. Do not Override
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1~32
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Received
2. Not Received
n = 0~100
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
Summary
Privilege to change the Travelling Class of Service Override Code.
Trunk Group Access Code Over Ride (for Attendant console) (Not
available in R1).
Disable Services Tone for Data Privacy. Service tone, such a Call
Waiting Tone, should be disabled for modems, FAXes, and similar
devices.
Enable/Disable the station to receive Call Waiting (Campon) and Ring
Over Busy Tone. CW tone is always two beeps. ROB tone can be two
beeps or continuous as set in PRG 204, 27.
Privilege to put the user name in the list display of Large LCD
(Directory Assistance)
Enable DND override by door phone.
Enable Emergency ringdown.
Privilege to use System Speed Dial.
Network COS number.
OCA occurs automatically when making a call to a busy station that
allows OCA calls to be received.
The privilege to make OCA calls to other stations.
Devices connected to RSTU circuits that do not automatically hang
up, and connect to CO lines that do not provide disconnect
supervision, should be set with ìNot Received.î This enables the auto
disconnect Tandem timer in PRG 104, PB06 for these types of
Connections.
The number of station speed dial bins allocated to this station
(maximum=100 per station).
Enabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will be on hold. This will
allow the other stations to press the CO or GCO button to pickup the
parked call.
Disabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will appear busy. This
will prevent the other stations to press the CO or GCO button to
pickup the parked call.
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station will receive stuttered dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set. This
feature is available with Strata CTX R1.3 software.
Disable: This station will receive normal dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set.
Strata CIX/CTX Telephone Button Programming 11/04