Toshiba Strata CIX Programming Manual page 31

Table 1-13 Program 117
Button Sequence
120 Tenant Data
Assignment
120 Hold
,
120-00 Tenant Number
Hold
n, ,
120-01, Dial 0 Call Day 1, 2, or
120-02, 3 Dst Type
120-03
FB01 Hold
, n=1 or 3,
or (see next row)
FB01 2
, n= (Dialing
Spkr
Digits), .
DEST=enter values.
Hold
120-04 Night Mode Relay
FB04 Hold
, n,
120-05 Night Bell Relay
FB05 Hold
, n,
Strata CIX/CTX Telephone Button Programming 11/04
Value(s)
n = 1~8. No Data (Default)
n = 1. No Data (default)
2. Dialing Digits (see
în=2î below)
3. Night Bell
DEST Up to 32 digits for each
= Day Mode selected
(default = noData)
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
Telephone Button Programming
Summary
This program enables you to select an Attendant or Night Bell to ring
when dialing 0 in Day 1, Day 2 or Day 3 mode for up to eight different
Tenants. You can also assign the general purpose relay to the Night
Bell in this program.
Select the Tenant number for which the daily schedules will be
configured.
Select to call an Attendant or select to ring the Night Bell when dialing
the Tenant Attendant Access Code in the Day1, Day 2, or Day 3 mode
for this Tenant.
The Tenant Attendant Access Code must be assigned in Prg 102. If it
should be ì0,î the Attendant Console Group Access Code, which is
ì0,î must be deleted.
Enter the PDN of the Attendant (BATI) to ring when dialing Tenant
Attendant Access Code in Day, Day2, or Day 3 mode.
Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay continuously
when the system is in the night mode.
Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay when a CO line or
DID rings when the system is in night mode. The CO or DID line must
be assigned to ring the night bell.
100 Series Programs
1-27