Toshiba Strata CIX Programming Manual page 103

Figure 1-3 Version Code
• Product ID – This is the first character in the version code string. "N" designates CTX670 and "S"
CTX100.
• Country Code – "A" identifies the country (USA, Canada, Mexico).
• CTX Release Level – This string of numbers identifies the Strata CTX Release level (NA101=R1.01,
NA102=R1.02, NA103=R1.03, etc).
• CTX Software Version – This string of characters identifies the current software version. For the
example above, the software is called "M00XX, MA2XX, MA3XX, etc," where XX is the version
number.
• DTMF Version – This three character string identifies the existence of DTMF and ABR circuits and
the version. The "D" designation indicates that DTMF is being applied to the Strata CTX while "09"
indicates the DTMF version number.
• Installed Equipment ID – There are five characters, each referencing a unique equipment
identification value assigned to hardware installed in your Strata CTX system. If the particular
hardware is not installed a "-" displays. The following are the equipment identifier designations.
• B ñ BBMS is installed.
X ñ BEXS is installed.
•
• S ñ BSIS is installed.
• E ñ The Ethernet is installed.
M ñ The Modem is installed.
•
Strata CIX/CTX Telephone Button Programming 11/04
Telephone Button Programming
900 Series Programs
1-99