Toshiba Strata CIX Programming Manual page 132

System Error Codes
Trunk Programming Error Codes
Program Code
308
309
310
311
312
313
2-16
Occurred Sub-
FB parameter
FB00
33
FB03
33
FB00
80
FB15
33
FB05 ~
48
FB10
FB00
49
FB03
49
FB04
49
FB00
51
FB01
51
FB03
80
FB01
82
FB03
96
FB04
FB01
98
FB00
33
FB01 ~
48
FB03
FB00
80
FB01
49
FB01
49
49
80
FB00
82
FB00
33
FB00
33
FB02
49
FB03
FB00
80
Error Descriptions
The entered equipment value is invalid.
Wrong assignment intervals.
The designated trunk equipment does not exist in the system.
The pause assignment is wrong.
No incoming destination number is entered for the parameter
required.
The entered DID conflicts with an existing wild card PCB. The
allowable number of DID assignments including a wild card
PCB is exceeded.
The selected GCO conflicts with an existing ILG number.
The selected Pool Line Group conflicts with an existing ILG
number.
The entered ILG number does not exist in the system.
The length of entered DID value exceeds the allowable
contract digit number.
The entered GCO key group does not exist in the system.
The selected ILG number does not exist in the system. The
number of ILGs exceed the system capacity.
The number of allowable GCO or POOL key group
assignments has been exceeded.
The allowable number of DID assignments has been
exceeded.
The entered equipment value is invalid.
No incoming destination number is assigned for the required
parameter.
The entered circuit is not set to support the designated trunk.
Although DISA security is set to Necessary, no DISA code
has been assigned.
The entered DID number is not assigned to an ILG.
The DID Number entered is invalid.
DID Number entered does not exist in the system.
The entered ILG number does not exist in the system.
The trunk number entered is out of the range.
The entered equipment value is invalid.
When Signalling Method field is set to CLASS:
•
The Signalling Contents field value must be assigned
•
The CLID Equipment Number Position circuit for the CIU
must be entered.
The entered trunk number does not exist in the system.
Strata CIX/CTX Telephone Button Programming 11/04