Toshiba Strata CIX Programming Manual page 126

System Error Codes
Station Programming Error Codes
Program Code
213
214
215
2-10
Sub-
FB
parameter
-
82
82 - 120
110
-
96 130
140
98 -
FB01~FB08
33
-
49
-
50
-
51
-
52
FB00
80
FB01~FB08
80
FB01~FB08
96
-
98
-
33
100
110
FB01
33 120
130
140
33 - 120
33 - 130
33 - 140
33 - 530
33 - 540
33 - 900
-
48
FB01
49 110
Error Descriptions
The additional information assigned to the Feature Button is
invalid.
The line number entered does not exist.
The allowable number of GCO, POOL or PhDn has been
exceeded.
The quantity of Flexible buttons programmed exceeds the
system's capacity.
The equipment number entered is out of the range.
The designated circuit is already in use.
Multiple DSSs cannot be assigned to the same Shelf/Slot/
Circuit.
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
The entered value conflicts with an existing numbering plan.
The designated Prime DN does not exist in the system.
The designated PCB and extension combination is not
allowed.
The number of DSS consoles entered exceeds the system's
capacity.
The number of DSS buttons entered exceeds the system's
capacity. This error can occur with PB1~PB8
The add-on module number is out of the range.
The sub-parameters for Key Number field must be assigned.
The line number entered is out of range for the system's
capacity.
The GCO key group/index entered is out of the range.
The POOL group entered is out of the range.
The BGM number entered is out of the range.
The door lock number entered is out of the range.
The application number entered is out of the range.
Essential sub-parameter values must be entered.
Two or more PhDNs with the same value are registered to one
extension.
Strata CIX/CTX Telephone Button Programming 11/04