Toshiba Strata CIX Programming Manual page 133

Program Code
315
33
49
33
33
49
49
316
52
54
80
80
33
33
33
49
49
49
49
50
317
52
54
80
80
80
80
96
Strata CIX/CTX Telephone Button Programming 11/04
Occurred Sub-
FB parameter
FB01
ìNONEî entered in any field is invalid.
FB02
FB04
FB05
FB03
The entered equipment value is invalid.
The PCB installed in the designated Shelf/Slot must be a
FB00
RDTU.
FB01
The channel group entered is out of the range.
FB01
RPTU Equipment Number entered is invalid.
When the equipment is moved, the number of the PCM
FB01
highway in the moved equipment is different from the current
equipment.
If the Span Interface speed is set to a value not equal to 1.5M,
FB04
the Dch position is modified.
The entered channel group number conflicts with an existing
FB00
ISDN extension(s).
FB01
The equipment number entered is out of range.
The entered channel group number does not exist in the
FB00
system.
FB01
The entered circuit must be an assigned ISDN.
FB00
The entered equipment value is invalid.
FB03
The ILG entered is out of the range.
FB04
The OLG entered is out of the range.
FB03
ì0î was entered in ILG when OLG was not registered.
FB03
The entered ILG/OLG values do not have ISDN assignments.
FB04
FB04
The OLG entered is not registered in the system.
FB04
ì0î was entered in OLG when ILG was unregistered.
The T-Wait Timer can only be enabled if the Protocol is set to
FB18
National ISDN.
The entered channel group number conflicts with an existing
FB00
ISDN extension(s).
The quantity of lines, ISDN channels and PDNs entered
FB00
exceeds the number of ports licensed with this processor.
The entered channel group number does not exist in the
FB00
system.
FB01
The entered circuit must be an assigned ISDN.
FB03
The entered ILG number does not exist in the system.
FB04
The entered OLG number does not exist in the system.
The allowable channel group assignments exceed the system
FB00
capacity.
Trunk Programming Error Codes
Error Descriptions
System Error Codes
2-17