Toshiba Strata CIX Programming Manual page 113

Telephone button programming manual
Hide thumbs Also See for Strata CIX:
Table of Contents

Advertisement

Program Number(s): 912
Prerequisite Program:
Reference:
Access Sequence:
Note The Shelf number is entered in ìXXî format where Shelf is a two digit value from 01~07
corresponding to the Strata CTX Cabinet number. See
description of the LED display.
FB Name
Equipment
Slot #1
Slot #2
Slot #3
Slot #4
Slot #5
Slot #6
Slot #7
Slot #8
Slot #9
Slot #10
FB01
FB10
1. Press
~
Access Sequence above.
Note The slot to which your programming phone is connected can not be set to Make Busy.
Hold
2. Press
to execute.
Hold
again to return to CABINET= prompt.
3. Press
# # Hold
4. Press
5. Enter another program number to continue programming or press
mode.
Program Button LEDs
The LED blink pattern indicates the following:
• Red continuous blinking – PCB experienced a Make Busy status error.
• Red continuous illumination – PCB Make Busy Status mode is on.
• Green continuous blinking – PCB Make Busy Status mode is stand by.
• Green intermittent blinking – PCB Make Busy Status mode is idle.
Strata CIX/CTX Telephone Button Programming 11/04
Format SmartMedia Card
None
Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱ .
At the PASSWORD= prompt, Enter your password and press Hold .
At the PROG= prompt enter 912 and press Hold .
At the CABINET= prompt enter the Shelf number.
FB
Summary
00
Enter Cabinet Number
01
02
03
04
05
Enter 1 or 2
06
07
08
09
10
to enter your Make Busy selection for the appropriate Slot in the Cabinet entered in
to return to the PROG= prompt.
Telephone Button Programming
ìProgram Button
LEDsî below for a
Value
01~07 (value=xx)
1: Set make busy
2: Clear make busy
# # Hold
again to exit programming
900 Series Programs
1-109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctxStrata ctx28Strata ctx100Strata ctx670

Table of Contents