Toshiba Strata CIX Programming Manual page 97

Table 1-38 Programs 650~660 (continued)
Button Sequence
657 Network COS
Mapping Table
Assignment
657 Hold
,
Network COS
Hold
n,
657-01 Local COS
FB01 Hold
, n,
657-02 Off-hook Call
Announce
FB02 Hold
, n,
657-03 System Speed Dial
FB03 Hold
, n,
657-04 COS Override
FB04 Hold
, n,
657-05 TGAC Override
FB05 Hold Hold
, n, ,
658/ Network DRL
Mapping Tables
659/
660
658/659/660 Hold
,
Type
Hold
n,
Network DRL/FRL/
QPL
FB01 Hold
, n,
661 Network DN Table
661 Hold
,
661-00 Network DN
Hold
n,
661-01 Node ID
FB01 Hold
, n,
673 Delete Node ID for
Private Networking
Over IP
673 Hold
,
673-00 Node ID
Hold
n,
673-01 Registration State
FB01 Hold
, n,
Strata CIX/CTX Telephone Button Programming 11/04
Value(s)
n = 1~32
n = 1~32
n = 1. Enable
2. Disable (default)
n = 1. Outbound
2. Inbound
n = 1~16
n = Five ASCII characters max.
(Default = No Data)
n = Six ASCII characters max.
(Default = No Data)
n = upto six digits
n = 1. doesnít exist
2. exist
3. delete
Telephone Button Programming
Summary
This table translates a Network COS received as part of a Traveling
Class Mark to a local Class of Service for access to local services.
There is no translation of Outgoing Network COS.
Enter the Network COS to be translated (1~32).
Enter the Local COS to be used in place of the received Network
COS (1~32).
Choose whether an incoming call with this Network COS can activate
Off-Hook Call Announce.
Choose whether an incoming call with this Network COS can use a
System Speed Dial number to make an otherwise restricted outgoing
call.
Choose whether an incoming call with this Network COS can use
Class of Service Override.
Choose whether an incoming call with this Network COS can override
local Trunk Group Access Control. Typically an attendant function.
This command is used to establish two mapping tables to equate
local DRLs with network DRLs for both outbound and inbound
network calls.
Choose ìOutboundî to equate the DRL of the local originator to a
Network DRL. Choose ìInboundî to equate a received Network DRL
with a local DRL for local termination.
Enter the local DRL/FRL/QPL you want to map to Network DRL/FRL/
QPL 1~DRL/FRL/QPL 16. This value can be different depending on
the type of table chosen above.
This program assigns the PDN, PhDN or Pilot DNs to a CTX node ID.
This include all DNs in all CTX nodes on the CTX network, except the
DNs in the node you are currently programming.
Enter the PDN, PhDN or Pilot DNs that should be assigned to a CTX
Node ID. This include all DNs in all CTX Nodes on the CTX network,
except the DNs in the node you are currently programming.
Enter the CTX Node ID that should be assigned to the DN.
This program deletes Node IDs.
Delete Node ID
Delete Registration State.
600 Series Programs
1-93