Mitsubishi FUEL Manual page 310

13I-116
Engine-A/T-ECU Harness Side Connector Terminal Arrangement
Terminal No. Check item
3 - 41 Oxygen sensor heater (front)
26 - 41 Oxygen sensor heater (rear)
34 - 41 Purge control solenoid valve
Between terminal Earth
42 and body earth
Between terminal
48 and body earth
51 - 41 EGR valve (A)
53 - 41 EGR valve (C)
60 - 41 EGR valve (B)
62 - 41 EGR valve (D)
44 - 81 Engine coolant temperature sensor
64 - 81 Intake air temperature sensor
79 - 81 Accelerator pedal position switch
GDI -
Troubleshooting
Standard value, normal condition (check conditions)
4.5 - 8.0 W (at 20_C)
11 - 18 W (at 20_C)
28 - 36 W (at 20_C)
Continuity (0 W)
10 - 20 W (at 20_C)
5.1 - 6.5 kW (When coolant temperature is 0_C)
2.1 - 2.7 kW (When coolant temperature is 20_C)
0.9 - 1.3 kW (When coolant temperature is 40_C)
0.26 - 0.36 kW (When coolant temperature is 80_C)
5.3 - 6.7 kW (When intake air temperature is 0_C)
2.3 - 3.0 kW (When intake air temperature is 20_C)
1.0 - 1.5 kW (When intake air temperature is 40_C)
0.30 - 0.42 kW (When intake air temperature is 80_C)
Continuity (when the accelerator pedal is released)
No continuity (when the accelerator pedal is
depressed slightly)