Mitsubishi FUEL Manual page 304

13I-110
Engine-ECU Harness Side Connector Terminal Arrangement
Terminal No. Check item
5 - 47 EGR valve (D)
47
6 - EGR valve (C)
32 - 47 EGR valve (B)
34 - 47 EGR valve (A)
16 - 47 Purge control solenoid valve
44 - 72 Engine coolant temperature sensor
46 - Body earth Earth
58 - Body earth
62 - 72 Intake air temperature sensor
79 - 49 Accelerator pedal position switch
89 - 47 Oxygen sensor heater control (front)
90 - 47 Oxygen sensor heater (rear)
GDI -
Troubleshooting
Standard value, normal condition (check require-
ments)
10 - 20 W (at 20_C)
28 - 36 W (at 20_C)
5.1 - 6.5 kW (when engine coolant temperature is
0_C)
2.1 - 2.7 kW (when engine coolant temperature is
20_C)
0.9 - 1.3 kW (when engine coolant temperature is
40_C)
0.26 - 0.36 kW (when engine coolant temperature is
80_C)
Continuity (0 W)
5.3 - 6.7 kW (when intake air temperature is 0_C)
2.3 - 3.0 kW (when intake air temperature is 20_C)
1.0 - 1.5 kW (when intake air temperature is 40_C)
0.30 - 0.42 kW (when intake air temperature is 80_C)
Continuity (when the accelerator pedal is released)
No continuity (when the accelerator pedal is slightly
depressed)
4.5 - 8.0 W (at 20_C)
11 - 18 W (at 20_C)