Mitsubishi FUEL Manual page 265

Multipoint fuel injection (mpi)
Table of Contents

Advertisement

From the previous page
Check ignition coil spark for each cylinder.
(1) Remove the ignition coil.
(2) Install a new spark plug to the removed ignition coil.
(3) Disconnect the injector intermediate connector.
Caution
Never touch the connector terminal as approx. 100 V is
applied to the injector, or you are seriously injured.
(4) Earth the spark plug electrode securely.
(5) Check that the spark plug ignites when the engine is cranked.
Check all the following items:
D Spark plug
D Compression pressure
D Foreign material (such as water or kerosine) entered the fuel
lines
Check trouble symptom.
NOTE:
*:
Refer to the '99 GALANT Workshop Manual (Pub. No. PWDE9611-A)
GDI -
OK
OK
OK
Troubleshooting
NG
Replace the ignition coil.
NG
Replace the injector.
13I-71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpi 4g6Mpi 6a1

Table of Contents