Mitsubishi FUEL Manual page 294

13I-100
Item Check items
No.
25 Barometric
pressure sen-
sor
26 Accelerator
pedal position
switch
27 Power steer-
ing fluid pres-
sure switch
28 A/C switch
31 Small lamp
switch
34 Air flow sensor
reset signal
37 Volumetric effi-
ciency
38 Crank angle
sensor
GDI -
Requirements
Ignition switch: ON Altitude: 0 m
Altitude: 600 m
Altitude: 1,200 m
Altitude: 1,800 m
Ignition switch: ON Release the accel-
(Depress and re- erator pedal.
lease the accelera-
Depress the accel-
tor pedal several
erator pedal slight-
times)
ly.
Engine: Idling Steering wheel sta-
tionary
Steering
turning
Engine: Idling (The A/C switch: OFF
A/C compressor is A/C compressor is
running when the
A/C switch: ON
A/C switch is on.)
Engine: Idling Lighting
OFF
Lighting switch: ON
Engine: After hav- Engine is idling
ing warmed up
3,000 r/min
D Engine coolant Engine is idling
temperature:
80 - 95_C
D Lamps, electric 2,500 r/min
cooling fan and
all accessories:
OFF Engine is suddenly
D Transmission:
raced
Neutral
(A/T: P range)
D Engine: Cranking [reading is possible
at 2,000 r/min or less]
D Tachometer: Connected
Troubleshooting
Normal condition
101 kPa
95 kPa
88 kPa
81 kPa
ON
OFF
OFF
wheel ON
OFF
ON
switch: OFF
ON
ON
OFF
15 - 35 %
15 - 35 %
Volumetric
ciency increases in
response to racing
Engine speeds dis-
played
MUT-II
tachometer
identical.
Inspection
procedure
No.
Code No.
P0105
Procedure
No. 29
Procedure
No. 31
Procedure
No. 32 No. 32
Procedure
No. 35
Code No.
P0100
-
effi-
-
on the
and
are
Reference
page
13I-15
13I-93
13I-95
13I-95
13I-97
13I-13
-
-