Programming Remote Feature Access; Remote Access Password - Inter-Tel Axxess 8560 User Manual

PROGRAMMING REMOTE FEATURE ACCESS
If you are away from your desk and forgot to put your phone in DND, don't worry.
With the Remote Feature Access, you can place your phone in DND or forward calls
from any other phone on the system. And, if you have a special dial-up line, you can
access your phone features from an outside line.
NOTE:
For your convenience, a pocket-sized guide of the Remote Feature Access is
located in the front of this guide.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your phone:
1. DialD
1111.
2. Enter your current password, followed by
g.
NOTE:
Your extension number is your password at default.
3. Enter the new password followed by
g.
You hear a confirmation tone.
4. Enter the new password again for verification followed by
g.
You hear a confir-
mation tone.
To change the station password using remote programming, see the next page.
Axxess® Model 8560 Phone and Model 8660 IP Phone User Guide 63