Method Of Changing Memory Switch Data - JUKI LBH-1790 Instruction Manual

20. Method of changing memory switch data
1) Set the mode to input mode.
When the back-lght of LCD dsplay 1 shows the
nput mode n blue color, t s possble to change the
memory swtch data. When the back-lght shows the
sewng mode n green color, press READY key 2
to change over to the nput mode.
2) Call memory switch data edit screen.
Press MODE key 4
data (level ) edt screen A s dsplayed.
Further hold pressng the key for 3 seconds, and
memory swtch data (level 2) edt screen B s
dsplayed.
3) Select memory switch data to change.
Press ITEM SELECTION key !0
select the data tem whch you desre to change.
4) Change data.
There are one data tem to change the numercal
value and the other data tem to select the
pctograph n the memory swtch data.
No. such as s attached to the data tem
to change the numercal value. Set value can be
changed by ncreasng/decreasng the value wth
DATA CHANGE key !1
No. such as s attached to the data tem to
select the pctograph. Pctograph can be selected
wth DATA CHANGE key !0
For the detals of memory swtch data, refer
/
to 21. Memory switch data list.
, and memory swtch
and
.
.
– 42 –
Data item No. Pictograph showing data item
2
1
level 1
level 2
4
!0 !1