JUKI LBH-1790 Instruction Manual page 12

(10) Managing the cord
) Slowly tltng the sewng machne, check that the cords are not forcbly pulled.
2) Fx the cords wth cord settng plate 1 as shown in the figure.
When you tilt the sewing machine, make sure that the sewing machine head support
bar 2 is placed on the table.
(11) Installing the eye protection cover
WARNING :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.
Be sure to nstall and use eye protecton cover 1 and use the sewng machne.
When placed longitudinally
1
Operator
2
When placed horizontally
– 0 –
1
1
Operator