Table of Contents
Advertisement
8. HOW TO USE THE MEMORY SWITCH
8-1. Method of changing memory switch data
❷
4) Change data.
There are one data item to change the numerical value and the other data item to select the pictograph in
the memory switch data.
No. such as
is attached to the data item to change the numerical value. Set value can be changed
by increasing/decreasing the value with DATA CHANGE key
No. such as
is attached to the data item to select the pictograph. Pictograph can be selected with
DATA CHANGE key
→ For the details of memory switch data, refer to
❽
❻
❼
❹
❼ .
"I.8-2. List of the memory switch functions"
－
1) Set the mode to input mode.
Under the input mode where SET READY LED
goes out, change to the memory switch data
is enabled.
If the current mode is the sewing mode, press
READY key
to the input mode.
2) Call memory switch data edit screen.
When MODE key
mode screen (operator level) is displayed.
On this screen, select the memory switch data
(level 1).
Press ITEM SELECT key
Memory switch 1". When you press EDIT key
❽ , the memory switch data screen ap-
pears.
3) Select memory switch data to change.
Press ITEM SELECT key
data item which you desire to change.
❼ .
－
59
❷ to change over the mode
❹ is pressed, the
❻ to select "01
❻ and select the
p.60.
Advertisement
Table of Contents
