(12) Fixing the temporary stop switch
The temporary stop switch has been in the state as shown in figure A at the time of delivery.
Loosen setscrew 1 and set the switch in the state as shown in figure B, and fix it with setscrew 1 to-
gether wth setscrew 2 suppled wth the machne.
1
(13) Thread guide rod
Thread guide rod
(14) Installing the thread stand
2
1
➡
A
– –
1
Securely fit the thread guide rod so that two side
holes n the thread gude rod face the thread gude.
) Assemble the thread stand, and set t n the
hole n the top rght corner of the machne table.
2) Tghten locknut 1 to fix the thread stand.
3) When celng wrng s possble, pass the power
cable through spool rest rod 2 .
2
B