Method Of Setting Sewing Data With/Without Edit - JUKI LBH-1790 Instruction Manual

12. Method of setting sewing data with/without edit
Ths sewng machne has been set so as not to be capable of edtng sewng data tems whch are less
frequently used at the tme of your purchase. When you desre to set the data more closely n accordance
wth the sewng products, set the sewng data tem to the edt possble state and use the machne.
For the settng of sewng data wth/wthout edt, when S52, rght parallel secton tenson s set to wthout
edt, sewng s performed wth the data of S5 left parallel secton tenson. When S56, 2nd bar-tackng
tenson s set to wthout edt, sewng s performed wth the data of S55, st bar-tackng secton.
When the sewng data tems other than the above ones are set to wthout edt, the data to be referred are
the ntal value data.
1) Set the mode to the input mode.
When the back-lght of LCD dsplay 1 shows
the nput mode n blue color, t s possble to set.
When the back-lght shows the sewng mode n
green color, press READY key 2
over to the nput mode.
2) Call sewing data with/without edit
changeover screen.
Press DATA key 8
seconds, and data wth/wthout edt changeover
screen A or B s dsplayed.
3) Select sewing data you desire to
change over.
Press ITEM SELECTION key !0
sewng data tem C you desre to change over.
At ths tme, changeover possble tem only can
be selected.
4) Changeover of with/without edit
Press DATA CHANGE key !1
pctograph dsplay C of sewng data repeats
reverse/non-reverse.
Non-reverse dsplay : Wth edt
Reverse dsplay : Wthout edt
Return to step 3), and plural sewng data tems
can be changed over.
5) Save data which have been set.
Press READY key 2
state of beng changed over can be saved. After
two seconds, the screen returns to the former one.
Press RESET key 1
to the former one wthout savng the data.
to change
for as long as three
, and select
, and
, and the data n the
, and the screen returns
A
B
2
1
8
– 28 –
(With edit)
C
(Without edit)
3
!0 !1