Using Pattern Register Key - JUKI LBH-1790 Instruction Manual

15. Using pattern register key
Regster pattern Nos. whch are frequently used wth the pattern regster key and use them.
Patterns whch have been regstered can be selected by pressng only the pattern regster key under the
nput mode.
(1) Method of register
1) Set the mode to the input mode.
When the back-lght of LCD dsplay 1 shows the
nput mode n blue color, t s possble to regster
patterns.
When the back-lght shows the sewng mode n
green color, press READY key 2
over to the nput mode.
2) Call pattern register screen.
Press key (P to P3) @7
you desre to regster pattern No. for as long
as 3 seconds, and pattern regster screen A s
dsplayed.
3) Select pattern No.
Pattern No. B whch can be used at present
flashes on and off in the display. Press ITEM
SELECTION key !0
pattern No. you desre to regster.
When trash can s selected, regster can be
released.
4) Start register.
Press READY key 2
the screen returns to the nput screen after two
seconds.
Press RESET key 3
to the former one wthout regsterng.
(2) Register status at the time of your purchase
Regster key
P
P2
P3
to change
to whch
, and select the
to start regster and
, and the screen returns
Regstered pattern No.
Pattern No. 
Pattern No. 2
Pattern No. 3
3
2
B
A
!0
– 35 –
1
@7