3. Adjusting the presser bar pressure
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
1
4. Adjustment of the bobbin presser unit
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
8 to 15mm
1
3
To adjust the pressure appled by the presser bar
to fabrc, turn presser sprng regulator 1 . When the
pressure s not enough to prevent fabrc from puck-
erng, turn regulator 1 clockwse.
Loosen nut 1 and adjust the poston wth stopper
sprng 2 so that the dstance from the front end of
machne bed to bobbn presser 3 s 8 to 5 mm
when the sewng machne stops. Then tghten nut 2 .
2
– 49 –