Operation Of Cp-20 (Advanced); Performing Sewing Using The Pattern Keys ( , , , And ); Register To The Pattern Key - JUKI AMS-210E/IP-410 Instruction Manual

3-7. operation of cP-20 (advanced)

(1) Performing sewing using the pattern keys (
When regsterng the patterns already regstered (No. 1 to 200) to P1 to P25, callng of the pattern can
be performed wth one-touch wthout selectng by scrollng of pattern No.
It s possble to change and regster enlargement/reducton rato, max. speed lmtaton, thread tenson,
and sewng poston.
* When selectng P6 to P25, perform the selecton by combnaton of
keys as shown n the table below.
P-No. Selecton key
P1 P1
P2 P2
P3 P3
P4 P4
P5 P5
P6 P1+P2
P7 P1+P3

(2) register to the pattern key

Settng example : Regster followng settng to the P2., Pattern No. 3, X scale rate : 50%, Y Scale rate :
80%, Max. speed lmtaton : 2,000 rpm, Thread tenson : "50", Pattern poston : 0.5 mm to the rght and
1 mm to the front
P-No. Selecton key P-No.
P8 P1+P4 P15
P9 P1+P5 P16
P10 P2+P3 P17
P11 P2+P4 P18
P12 P2+P5 P19
P13 P3+P4 P20
P14 P3+P5 P21
〜
– 94 –
, , ,
Selecton key P-No.
P4+P5 P22
P1+P2+P3 P23
P1+P2+P4 P24
P1+P2+P5 P25
P1+P3+P4
P1+P3+P5
P1+P4+P5
1) Turn ON the power swtch and press
to enter mode settng (memory swtch set-
tng). (Sewng LED should be put out.)
2) Indcate the pattern regster mode wth
or key.
3) Press key.
Enter the pattern regster mode.
When the space after P1 is blank, the
data is in the registered state. When
the space after P1 is "- -", the data is
not in the registered state.
4) Press key. (Select P-No. to be regs-
tered.) Selecton can be performed wth
or key.
5) Press key to ndcate the Pattern No
. Set the Pattern No. to "3" wth
key.
and )
, , , and
Selecton key
P2+P3+P4
P2+P3+P5
P2+P4+P5
P3+P4+P5
or
key