15. Using pattern register key
Register pattern Nos. which are frequently used with the pattern register key and use them.
Patterns which have been registered can be selected by pressing only the pattern register key under the
input mode.
(1) Method of register
1) Set the mode to the input mode.
When the back-light of LCD display q shows the
input mode in blue color, it is possible to register
patterns.
When the back-light shows the sewing mode in
green color, press READY key w
over to the input mode.
2) Call pattern register screen.
Press key (P1 to P3) @7
desire to register pattern No. for as long as 3
seconds, and pattern register screen A is displayed.
3) Select pattern No.
Pattern No. B which can be used at present flashes
on and off in the display. Press ITEM SELECTION
key !0
, and select the pattern No. you desire
to register.
When trash can
released.
4) Start register.
Press READY key w
screen returns to the input screen after two
seconds.
Press RESET key e
to the former one without registering.
(2) Register status at the time of your purchase
Register key
P1
P2
P3
to change
to
which you
is selected, register can be
to start register and the
, and the screen returns
Registered pattern No.
Pattern No. 1
Pattern No. 2
Pattern No. 3
e
w
B
A
!0
36
q
@7