Method Of Setting Sewing Data With/Without Edit - JUKI LBH-1790AN Instruction Manual

12. Method of setting sewing data with/without edit

This sewing machine has been set so as not to be capable of editing sewing data items which are less
frequently used at the time of your purchase. When you desire to set the data more closely in accordance
with the sewing products, set the sewing data item to the edit possible state and use the machine.
* For the setting of sewing data with/without edit, when S052, right parallel section tension is set to
without edit, sewing is performed with the data of S051 left parallel section tension. When S056, 2nd
bar-tacking tension is set to without edit, sewing is performed with the data of S055, 1st bar-tacking
section.
When the sewing data items other than the above ones are set to without edit, the data to be referred
are the initial value data.
1) Set the mode to the input mode.
Under the input mode where SET READY LED 
goes out, data setting is enabled.
If the current mode is the sewing mode, press
READY key ❷
to the input mode.
2) Call sewing data with/without edit
changeover screen.
Press MODE key ❹
Sewing parameter edit select". Then, data edit
enable/disable changeover screens A and B are
displayed.
3) Select sewing data you desire to
change over.
Press ITEM SELECT key ❻
sewing data item C you desire to change over.
At this time, changeover possible item only can
be selected.
4) Changeover of with/without edit.
When DATA CHANGE key ❼
the pictograph display C for the currently-selected
sewing data is changed over.
Non-reverse display : With edit
Reverse display : Without edit
Return to step 3), and plural sewing data items
can be changed over.
5) Save data which have been set.
When RETURN key ❾
changed-over state is saved and the screen
returns to the mode screen. When RESET key
❸
is pressed, the screen returns to the
previous screen.
to change over the mode
. Select "05
, and select
is pressed,
is pressed, the
– 36 –
A
(With edit)
B
(Without edit)
 ❷
C
❻ ❼
❾