Table of Contents
Advertisement
2-8. Method of setting sewing data with/without edit
Ths sewng machne has been set so as not to be capable of edtng sewng data tems whch are less
frequently used at the tme of your purchase. When you desre to set the data more closely n accordance
wth the sewng products, set the sewng data tem to the edt possble state and use the machne.
* For the settng of sewng data wth/wthout edt, when S52, rght parallel secton tenson s set to wthout
edt, sewng s performed wth the data of S51 left parallel secton tenson. When S56, 2nd bar-tackng
tenson s set to wthout edt, sewng s performed wth the data of S55, 1st bar-tackng secton.
When the sewng data tems other than the above ones are set to wthout edt, the data to be referred
are the ntal value data.
2
3
A
8
B
1
C
(With edit)
!0
!1
1
C
(Without edit)
− 64 −
Set the mode to the input mode.
1
When the back-lght of LCD dsplay 1 shows
the nput mode n blue color, t s possble to set.
When the back-lght shows the sewng mode
n green color, press READY key
change over to the nput mode.
Call sewing data with/without edit change-
2
over screen.
Press DATA key
seconds, and data wth/wthout edt changeover
screen A or B s dsplayed.
Select sewing data you desire to change
3
over.
Press ITEM SELECTION key
select sewng data tem C you desre to change
over.
At ths tme, changeover possble tem only can
be selected.
Changeover of with/without edit
4
Press DATA CHANGE key
pctograph dsplay C of sewng data repeats
reverse/non-reverse.
Non-reverse dsplay : Wth edt
Reverse dsplay : Wthout edt
Return to step 3 , and plural sewng data tems
can be changed over.
Save data which have been set.
5
Press READY key
state of beng changed over can be saved. After
two seconds, the screen returns to the former
one.
Press RESET key
turns to the former one wthout savng the data.
2 to
8 for as long as three
!0 , and
!1 , and
2 , and the data n the
3 , and the screen re-
Advertisement
Table of Contents
