Table of Contents
Advertisement
Message catalog
Message
English
1
2
3
4
5
6
7
8
9
Pictograph
A. When "start/stop", "reverse stitch" or "thread-trimming"
B. When presser foot is raised while sewing.
A. When one of the buttonhole stitches is selected and the
Same as the left
A. When a stitch pattern other than buttonholes is selected
Same as the left
A. When in the
A. When in the
B. When in the
A. When the process of saving a pattern into folder is com-
A. When in the option setting, settings which will be kept
A. When the setting of the machine is changed to twin nee-
A. When in twin needle sewing, a stitch pattern other than
Cause (Reason to display such messages)
button is pressed while the presser foot is raised.
buttonhole sensor pin is not connected, the machine
starts to sew.
but the buttonhole sensor pin is connected, the machine
starts to sew.
mode, user attempts to select stitch
patterns more than the maximum number of memory
(70).
mode and more than one stitch pat-
tern is selected, user attempts to move to mode
and/or
.
mode and more than one stitch pat-
tern is selected, user presses the
more than two seconds (deleting all).
pleted.
after turning off the machines are changed. (Thread
trimming by foot controller, LCD contrast, buzzer volume
and language setting)
dle sewing (option setting).
twin needle sewing is selected.
button for
89
Advertisement
Table of Contents
