HP Data Protector A.06.11 Command Line Interface Manual page 86

ENTERPRISE_VIRTUAL_ARRAY_OPTIONS
1. ZDB-to-disk session
-snapshot -smisapp_sys bck_sys -instant_recovery [-snapshots
number]
2. ZDB-to-disk+tape session
-snapshot -smis app_sys bck_sys -instant_recovery [-snapshots
number] [-wait_clonecopy number]
3. ZDB-to-tape session
-snapshot -smis app_sys bck_sys -snapshot_type {standard | vsnap
| clone [-wait_clonecopy number]} -snapshot_policy {strict | loose}
-replica_conf {local | combined [-ca_failover_option {follow_rep-
lica_direction | maintain_replica_location}]}
EXCHANGE_OPTIONS
-annotation {MIS | SRS | KMS}
{-all_storage_groups | -storage_group Storage_Group_Name1 [-store
Store1 [Store2...]] [-storage_group Storage_Group_Name2 [-store
Store1 [ Store2... ]]...]}
DESCRIPTION
FILESYSTEM BACKUP SPECIFICATION
The omnicreatedl command creates a filesystem backup specification file (datalist).
It searches all specified clients for local mount points and puts them in the backup
specification or on the stdout if no backup specification name is specified. If no
client is specified, all clients in the cell are searched.
MICROSOFT EXCHANGE SERVER ZDB BACKUP SPECIFICATION
The omnicreatedl command is also used to create an Exchange ZDB backup
specification file for the following disk arrays:
HP StorageWorks Disk Array XP
HP StorageWorks Virtual Array
HP StorageWorks Enterprise Virtual Array
When creating an Exchange ZDB backup specification file, if the circular logging is
disabled for any storage group, an Exchange ZDB transaction logs backup
86