HP Data Protector A.06.11 Command Line Interface Manual page 68

RETURN VALUES
See the man page omniintro for return values.
Additional return values of the omnib command are:
10
11
12
13
EXAMPLES
The following examples illustrate how the omnib command works:
1. To do a backup of a tree "/usr" of filesystem "senna" with the label "work",
using the compress option, to the backup device "DAT", run:
omnib -device DAT -filesystem senna:/ work -tree /usr
-compress
2. To back up the Data Protector internal database (IDB) on the client "geronimo"
with the label "newDB" to the backup device "ADIC3" and to create two mirrors
of this backup to the backup devices "LTO1" and "LTO2", run:
omnib -omnidb geronimo:/ newDB -device ADIC3 -mirror LTO1
-mirror LTO2
3. To perform an incremental backup using the backup specification OMNIGROUP,
run:
omnib -datalist OMNIGROUP -mode Incremental
4. To preview a backup of the tree "/Amt3" of the filesystem "Munich", skipping
the files with the ".fin" extension, run:
omnib -preview -filesystem Munich:/ -tree /Amt3 -skip
"*.fin"
5. To run a disk image backup of the section "/dev/rdsk/c201d1s0" on the client
"xanadu" to the backup device "Exa" and protecting the session against overwrite
for 4 weeks:
68
There was an error while backing up some files. All agents completed
successfully.
One or more agents failed, or there was a database error.
None of the agents completed the operation; session was aborted by
Data Protector.
Session was aborted by user.