Pool Poolname; Prealloc Mediumid [Mediumid] - HP Data Protector A.06.11 Command Line Interface Manual

-concurrency ConcurrencyNumber
Specifies the number of Restore Media Agents that can send data to a device
concurrently.
The maximum concurrency value is 32.
-crc
The CRC check is an enhanced checksum function. When this option is selected,
cyclic redundancy check sums (CRC) are written to the media during an object
copy. The CRC checks enables you to verify the media after the operation. Data
Protector re-calculates the CRC during a restore and compares it to the CRC on
the medium. It is also used while verifying and the media.
-encrypt
If this option is used, the Backup Media Agent enables hardware encryption on
the device. Data is encrypted and copied.

-pool PoolName

Selects a specific media pool for object copy. If not defined, a default media
pool from the device definition will be used.

-prealloc MediumID [MediumID]...

Defines the prealloc list. This is a subset of media used for object copy in the
specified sequence.
When using the prealloc list and the strict media allocation policy with the backup
device, Data Protector expects the sequence of the media in the device to
correspond with that specified in the prealloc list. If the media are not available
in this sequence, Data Protector issues a mount request. If no media are specified
in this list, the Data Protector allocation procedure is used to allocate media.
-filesystem Client:MountPoint Label
Selects the filesystem identified with Client:MountPoint Label for object
copying.
-winfs Client:MountPoint Label
Selects the Windows filesystem identified with Client:MountPoint Label
for object copying.
-netware Client:MountPoint Label
Selects the Netware filesystem identified with Client:MountPoint Label
for object copying.
-omnidb Client:MountPoint Label
Selects the IDB identified by Client:MountPoint Label for object copying.
-copyid N [-fixedcopy]
Selects the specified object copy as a source for object copying.
184