HP Data Protector A.06.11 Command Line Interface Manual page 333

The collected debug files can also be deleted (if the -delete_dbg option is
specified), or the disk space required on the Cell Manager for the collected files can
be displayed (if the -space option is specified). In these two cases, the selected files
are neither transferred from the clients to the Cell Manager nor packed on the Cell
Manager.
When collecting or deleting files or when displaying the required disk space,
additional criteria can be defined to limit the files selection. Thus, it is possible to
exclude the getinfo file, the log files, the debug files or any combination of the three
groups of files from the selection.
Using the command, the collected files can then be additionally packed to be sent
to the support center. The command provides also a means of unpacking the packed
collected files.
OPTIONS
-version
Displays the version of the omnidlc command.
-help
Displays the usage synopsis for the omnidlc command.
-session sessionID
Limits the collected debug files to those that were produced during the Data
Protector session identified by the sessionID. Note that on OpenVMS, the
omnidlc command run with the -session parameter does not collect the
debug files produced during specified session, because session names are not
part of the OpenVMS debug filename. Instead, all available logs are collected.
-did debugID
Limits the collected debug files to those identified by the debugID.
-postfix string
Limits the collected debug files to the specified debug postfix.
-no_filter
Does not limit (select) the collected debug files.
-hosts list
Limits the files to be collected to the clients specified in the list. The hostnames
must be separated by spaces. The debug files collected are still subject to
-session, -did or -postfix options.
-pack filename
Command line interface reference 333